Cuisinart White Food Processor Disc Holder Model DLC-DH

what our customer say this product:

Powered by

1. Carmelle Verified Buyer – 14 April 2024

   This container helps to store safely the sharp discs.
   I have stored all my Cuisinart discs and it a safe way to get at them.
   

2. Bubby Verified Buyer – 16 May 2024

   This is a great way to store the blades.
   

3. Stephanie Verified Buyer – 21 May 2024

   Love that I can store my blades when not in use and not worry about cutting myself with them loose in a drawer.
   

4. Kahuna Granny Verified Buyer – 29 August 2024

   My new Cuisinart food processor came with three disks. The instructions said to store them on a flat surface. Since this would take up space I really didn’t have I looked on cuisinartoutlets.com to find a solution. This seemed to fit the bill and I ordered one. It sits in the closet taking up a smaller footprint and will protect the disks. Great item!
   

5. Golf Junky Verified Buyer – 28 November 2024

   After years in the drawer, discs are finally easily retrievable. Have bought other style organizers in years past which were not up to the job. These work. Hold 3 discs each, which can be clearly seen through plastic door. These disc holders are stackable and have ‘sticky feet’ so they stay put. Door swings out allowing ez access to discs without unstacking.

   Holds discs only, not blades. Takes up more space than storing loose in the drawer but keeps discs protected, clean, and *available* for use. Design allows for labeling access door of similar discs with differing cut sizes (e.g., 8 mm vs. 4 mm slicing blades).

   Price seemed high to me but ended the frustration of digging thru drawer. Due to price, would give 4 1/2 stars if that option were available. Even so, I like them enough to round up instead of down. Product does what it is supposed to do – make things easier.
   

6. Dee Verified Buyer – 2 January 2025

   Very nice. Sturdy, easy to open/close, disks fit securely. Gripper feet.

   

7. Customer from Quebec Verified Buyer – 8 January 2025

   Does the job perfectly for my culinary robot
   

8. zlodge Verified Buyer – 13 January 2025

   I like the ease of placing and removing of the disks
   

9. Anonymous Verified Buyer – 15 January 2025

   Handy storage unit. Robust design. Good protection for processor discs.
   

10. MJ Verified Buyer – 4 February 2025

    This little holder is so easy to use and keeps sharp blades in a safe place. I wish it would hold the chopper blade but it just holds the slicer and shredder. It is well worth the extra expense. There is one extra slot for an extra blade that I might purchase.
    

11. LShaikh Verified Buyer – 8 February 2025

    I own three of this disc holder, all bought from cuisinartoutlets.com. They are perfect for safe storing all 9 of my cutting discs for my 9-cup Cuisinart food processor. The disc holder is made of sturdy plastic, opens easily, and discs can be safely placed inside to store or pulled out to use. My three disc holders look nice stacked, sitting beside my food processor on the countertop. I like it that they stack to save counter space. I like it too that each disc holder is small enough (can hold only 3 discs), just in case I don’t want to stack them on countertop and decide to put them in my small cupboard space. All in all, I’m very happy with my purchase and would recommend this disc holder to anyone who owns several cutting discs like me. *To Cuisinart maker: I wish that Cuisinart has a similar-looking holder for the disc stem, dough blade and stainless steel blade so they can be stored “uniformly” with the discs.

    

12. TS Verified Buyer – 25 February 2025

    This is a really nice container for my blades.no more storing the sharp blades loose in a drawer. I only wish that there was a larger disc holder for my other two blades. Easy to clean and store in your kitchen.

    

13. Natasha Stryker Verified Buyer – 28 February 2025

    I have 12 different discs for my cuisenart and had a HECK of a time keeping them in some kind of attractive organization that would keep my fingers free of accidental slices. They were banished to a box under the counter — not convenient to dig in a box full of round knives. I bought a few of these holders to accomodate all my blades; in one tower (4 holders) I have fixed the safty issue and quieted my OCD organization voices. It’s a win-win 🙂 ADD: A gal asked if the stack of them have to separated to remove blade discs, no they do not! I have several stacked and just swing the door open for each without problem. It is important that you have your hand supporting stack to remain verticle if you open the bottom door on a stack of 4, the weight of the top 3 full disc holders can make the stack sag a bit with the bottom door open, which makes me anxious, but shown no signs to cause actual concern for damage. If you hold the stack at the top when you open the bottom it is not an issue.

    

14. Jorge Berrueta Verified Buyer – 4 March 2025

    Compré este producto como accesorio al procesador de alimentos. La maquina llego dañada, no la puedo usar y la tengo que regresar, ya no me sirve esta cajita puesto que ya no tengo las navajas. Y resulta que no la puedo regresar.

    Muy decepcionada con la marca y el servicio
    

15. PowerShopper Verified Buyer – 9 April 2025

    I purchased it to hold the 3 blades that came with the hand cranked Westmark Multipurpose Rotary Cheese and Vegetable grater and unexpectedly found out that it will also hold (just barely) the combination slice/shred disc that comes with the Hamilton Beach 12-cup stack and snap food processor. I can close the “door” on the disc holder with the HB disc inside. Surprisingly, the door latch on the full disc holder holds the door closed even when the disc holder is held so that the clear “door” is facing down. However, I wouldn’t be throwing the disc holder around and expect the latch to hold. The diameter of this disc holder is a little wide for the Westmark blades but they still remain in their slots. This disc holder is supposed to only hold 3 blades but the Westmark discs are thinner. I put 2 Westmark discs in one slot. I leave the plastic cover that came with each disc on one disc and remove it from the 2nd disc and they both just fit into a slot hopefully without scratching each other over time.
    

16. iris Verified Buyer – 13 April 2025

    the centers are worn down and the pedestal that holds them both showing signs of wear. Don’t fit well any longer
    

17. Russ Verified Buyer – 8 June 2025

    Timely arrival, protected, and arrived with no damage. Almost decided not to buy this thinking I’d just throw the discs in a drawer! Memories returned of times when I couldn’t find something I put it in that drawer and made the purchase, glad I did!